I HTML-ized this page by hand after generating a text file from the man page.
This may not be the best job in the world, but all content remains verbose.
Here is what I see in my terminal after typing:$ man fspd
FSPD(1) General Commands Manual FSPD(1)
fspd, in.fspd - File Service Protocol (FSP) server
fspd [-f configfile] [-p port] [-i] [-v|-V] [-t timeout] [-X] [-d
directory] [-F ] [-T temporary directory] [-l logfile] [-P pidlogname]
[-b bandwidth] [-s packetsize]
fspd is the server for an anonymous-ftp style archive called FSP. The
main features of this service are: connection-less model, communication
robustness, server resource protection, inter-client protection, and
user friendly interface. Please read the INFO file bundled with the FSP
source for more information.
-f May be used to specify an alternate configuration
-i Use when fspd is running from inetd.
-p port May be used to specify an alternative port.
-d directory May be used to specify an alternative home direc-
-v | -V Show server version.
-X Turn on debuging.
-t timeout Set server inactivity shutdown timeout for running
in inetd mode. Default is 120 seconds. When -d is
used, this timeout works in normal mode also (use-
full for debuging of memory leaks).
-F Run fspd in foreground, do not daemonize.
-T directory Set server temporary directory used for uploading.
This directory can be outside FSP home directory
since it is not directly accessible by clients.
Using directory inside FSP home is not a security
-l logfile Write log output to file.
-P pidlogname Write pid to the given file name.
-b bandwidth Enable bandwidth limiting. Limit output to band-
width bytes per second.
-s packetsize Sets maximum allowed packet size or prefered packet
size. Server must support packets up to 1024, but
may prefer to send smaller packets. It may accept
packets over 1024 bytes. Default value is 1200
.FSP_OWNER Used to indicate the ownership of a directory.
This file contains lines with the same syntax as
host lines in fspd.cnf but without keyword host on
start of line. Host types D, I, N can be used to
restrict access to specific directory. Owners are
marked with host type O.
.README A text file that is sent to the client when the
directory is entered giving information about the
directory. It can only be hand created by the site
administrator at this time. This text file should
be no more than 1022 bytes in size. Any data above
this limit will be silently ignored. Name of this
file can be changed in server configuration file.
.FSP_OK_DEL Existence of this file in a directory grants non-
owner machines the permission to delete items from
.FSP_OK_ADD Existence of this file in a directory grants non-
owner machines the permission to add items to this
.FSP_NO_LIST Existence of this file removes right to list a
directory from non-owner.
.FSP_NO_GET Existence of this file in a directory means that
files in that directory cannot be read by public,
i.e. they are private.
.FSP_OK_MKDIR Existence of this file in a directory grants non-
owner machines the permission to create subdirecto‐
ries under the current directory.
.FSP_OK_RENAME Existence of this file in a directory grants non-
owner machines the permission to rename files in
.FSP_OK_PASSWORD Password required for non privileged access.
.FSP_OWNER_PASSWORD Password required for privileged access. You must
have also your IP listed in .FSP_OWNER file.
.TXXXXXXXXXXXX Transient temporary file in the FSP temporary
directory used for file uploading.
.GXXXXXXXXXXXX Transient temporary file in the FSP temporary
directory used for file downloading through the
fspd.conf A file containing control information about how
specific features of the server are to be used. See
the example.conf file for explicit details.
.FSP_CONTENT File used to cache directory listing. Such files
are normally created on demand in each directory
that fspd exports.
Server dumps stats to file specified as dumpfile in configura-
tion. This file must be writeable by server or server must have
rights to create it.
SIGINT | SIGTERM
Server performs cleaup and exits. All connected clients will be
disconnected. Because FSP is stateless protocol, if you start
server later, clients can continue without breakage.
1 configuration or command line invocation error.
2 can not open/bind server socket
3 can not change uid to runuid
4 can not change gid to rungid
5 out of memory
6 can not change directory to homedir
7 select() error
99 Internal terror
fcatcmd(1), fcdcmd(1), fgetcmd(1), fgrabcmd(1), flscmd(1), fmkdir(1),
fprocmd(1), fput(1), frmcmd(1), frmdircmd(1), fver(1), fducmd(1),
fhostcmd(1), fspd(1), fsp_prof(5), ffindcmd(1), fbye(1), fmvcmd(1)
FSP Dec 2004 FSPD(1)
Back to www.720k.net